How to design wardrobes

https://youtu.be/UqUXDBxYbic

Quick3DPlan – How to Design Wardrobes

🎯 Overview

In this video, we will learn how to design a complete wardrobe, from the structure and doors to internal modules and accessories, using all the customization tools available in Quick3DPlan.

---

1. Access and Initial Configuration

• Furnishing tab → select Wardrobe Design
• Insert the wardrobe on the desired wall
• Configure variables:
  • Project variables: affect only the current project
  • Default variables: changes that will affect all projects
• Save changes to make them effective

---

2. Wardrobe Structure

• The wardrobe dialog has four levels:
  • Structure
  • Doors
  • Moldings
  • Visible sides

Configure Modules:

• Define number of modules (e.g., 4 modules)
• Adjust total wardrobe width (e.g., 378 cm)
• Indicate room height (e.g., 250 cm)
• Configure depth of each module (e.g., 60 and 35 cm, and special 15 cm depth for the far-right module)
• Choose interior material: back panel, shelves, drawers, sides, and guides

---

3. Configure Doors

• Select door type: sliding, hinged, or no doors
• Choose number of doors (e.g., 4)
• Select door model (e.g., three panels)
• Modify material of each panel separately
• Adjust panel height percentages (e.g., central panel 50%)
• Apply changes to all doors

---

4. Moldings and Visible Sides

• Configure top molding (ceiling connection)
• Configure bottom molding (floor connection)
• Configure side moldings according to wall placement
• Select molding material
• Omit visible sides if the wardrobe is between walls

---

5. Internal Wardrobe Layout

Available elements: dividers, shelves, hanging rods, drawers, shoe racks, tie racks, and other accessories

• Basic drawers: insert one by one, independent
• Drawer units: prefabricated sets (1 to 5 drawers)
• Other drawers: shoe racks, tie racks, pants racks, etc.
• Place shelves in upper modules and pull-out glass shelves
• Insert hanging rods
• Adjust dividers to desired height and center or side positioning
• Modify materials if necessary
• Remove elements using the Delete button

---

6. Accessories and Decoration

• Insert removable mirrors, belts, tie racks, and other accessories
• Add clothes, shoes, and items: select model and assign materials to each element (shirts, buttons, pants, etc.)
• Customize until achieving the desired design

---

7. Final Visualization and Insertion

• Preview wardrobe in elevation or plan view
• Activate/deactivate door display to see the interior
• Click Accept and insert the wardrobe by dragging it to the desired location

---

Note:

This process allows you to create a fully customized wardrobe, including structure, internal layout, and finishes, ready to integrate into any Quick3DPlan project.