How to insert and edit units

https://youtu.be/1wFeNe6njBw

Quick3DPlan – How to Insert and Edit Furniture

🎯 Overview

This article explains how to use the Furnishing tab in Quick3DPlan to insert, configure, and edit furniture manually or automatically.

---

1. “Add Unit” Tool

1.1 Open the Furniture Dialog

• Go to the Furnishing tab
• Click on Add Unit

Dialog organized in levels:

• Type of furniture: base, wall, column, etc.
• Furniture height
• Available furniture list based on levels 1 and 2
• Subdivisions (only if the selected unit has them)
• Door and drawer combinations

Selecting Dimensions:

• Choose the width of the furniture
• Greyed-out values → not available for the selected combination
• To edit: delete the current value and enter a new one
• The icon will change when edited

---

2. Select Doors, Handles, and Models

2.1 Doors and Handles

• Modify using the corresponding button
• Use the dropdown or click on the image
• Predefined series available in the Model tab
• It is recommended to modify doors, handles, and materials after inserting the furniture

2.2 Counters and Accessories

• Baseboards, countertops, and splash backs for base units
• Cornices and moldings for wall units
• Activate or deactivate as needed
• Choose the model by clicking the image or using the dropdown

---

3. Second Unit

• Activate the Second Unit tab to automatically place a base and wall unit together
• If the first unit is a wall unit or column → the second tab is locked
• Configuration is identical to the first unit

Furniture with Appliances:

• Example: sink unit → tabs for sink and faucet
• Oven unit → tabs for oven and cooktop

---

4. Inserting Furniture

4.1 Manual Insertion

• Move the mouse to the desired position
• Press Space → rotate the unit automatically
• Press Space again → lock rotation
• Left‑click → confirm position
• The furniture dialog reopens to insert more

4.2 Multiple Insertion

• Activate the checkbox to insert multiple identical units consecutively
• Press Escape to finish

---

5. Automatic Insertion

• Places the new unit next to a reference unit
• By default → the last inserted unit
• Use red/blue arrows to place it to the right or left
• To change the reference → select another reference unit

3D View:

• Allows you to see the design more realistically

---

6. Special Insertions

• Corner unit between non‑perpendicular walls
• Unit at a specific distance between two walls (ideal for islands)
  • Select wall 1 and wall 2
  • Enter distance to both walls
  • The program automatically places the unit

Additional Options:

• Insert furniture centered on a wall
• Insert furniture under a window
• Alignment: back or front face

---

7. Editing Furniture

• Double‑click any inserted unit → opens the edit dialog
• Edit all parameters: dimensions, doors, handles, position, orientation
• Edit Furniture tool → alternative to modify any unit

---

Note:

These tools give full control over room furniture, both in manual and automatic insertions, facilitating fast and precise design in Quick3DPlan.